DESIGN OF UNIFORM LINEAR ARRAY WITH ALTERNATE
ELEMENTS FOR LOW CROSS POLARIZATION
This paper describe the design of corner feed microstrip antenna array. The microstrip array antenna is simulated using the IE3D electromagnetic simulator. The microstrip array antenna is designed on the glass epoxy FR4 dielectric substrate having the thickness of 1.6 mm. The designed antenna array resonates at a frequency of 5 GHz. The different parameters of antenna array such as gain return loss and radiation pattern is investigated. The elements used in array square patch antenna.
microstrip, IE3D, array
Xiang-Ling Liang ,Shun –Shi Zhen and WeiWang, “ Dual Polarized Corner Feed patch antenna array with high Isolation”. Microwave and Optical Technology Letters Vol.47, No.6, December 2005.
Shun -Shi Zhen, “Low-cost corner-fed microstrip antenna array with dual polarization” IEEE Microwave Conference, Vol. 928 – 931 vol.3 1999.
M. Wang, W. Wu and D. Fang, “Uniplanar Single Corner-Fed Dual-Band Dual-Polarization Patch Antenna Array” Progress In Electromagnetic Research Letters, Vol. 30,pp 41- 48, 2012.
Krzysztof Wincza and Slawomir Gruszczynski, “Design of electromagnetically coupled cornerseries- fed antenna arrays with the application for 24 GHz doppler sensors” IEEE Antennas and Propagation Society International Symposium ,pp. 2140 – 2143, 2007.
Prashant K Mishra, Dhananjay R. Jahagirdar, and Girish Kumar, “Broadband Dual Polarized Space-Fed Antenna Arrays with High Isolation” Progress In Electromagnetics Research C, Vol. 55, PP.105–113, 2014.
Rhazi Youssef, Seddik Bri and Rajaa Touahani, “Feeding Effect of Microstrip Patch Antenna ArrayIn the Q-band” International Journal Of Innovative Technology And Research Volume No. 1, Issue No. 4, June - July 2013,PP. 278 – 282.
Marija Milijic, Aleksandar Nesic and Bratislav Milovanovic. “Printed Antenna Arrays with High Side Lobe Suppression: the Challenge of Design” Microwave Review, 2013.
J R James and P S Hall, “Hand Book of microstrip Antennas” IEEE Electromagnetic wave series.
Janusz Mlynarczyk and Slawomir Gruszcyuski , “ Microstrip Antenna Array for a Microwave system operating at 18 GHz” MIKON 2012 ,19th International conference on microwave ,radar and wireless communications,May PP.21-23, Warsaw Poland
Karimashi S. “Dual Polarized Frequency Antenna Array For Weather Applicationsˮ IEEE Transactions Antenna and Propagation, 0018-926X , Oct 2013.
Q.-Q. He and B.-Z. Wang, “Design of Microstrip Array Antenna by Using Active Element Pattern Technique Combining with Taylor Synthesis Method”, Progress In Electromagnetics Research, PIER 80,PP. 63–76, 2008.
Mustafa Secmen, “Active Impedance Calculation in Uniform Microstrip Patch Antenna Arrays with Simulated Data”, 6th European Conference on Antennas and Propagation (EUCAP), IEEE 2011.
Pozar, D. M. and D. H. Schaubert, “Comparison of three series fed microstrip array geometries,"Proc. IEEE AP-S Int. Symp.Vol. 2,PP. 728 -731, 1993.
Pozar, D. M., “A review of bandwidth enhancement techniques for microstrip antennas," Microstrip Antennas: Analysis and Design of Microstrip Antennas and Arrays,PP. 157-166, IEEE Press, 1995.
R. A. Sainati, “CAD of Microstrip Antennas for Wireless Applications”. Boston, MA: Artech House, 1996.
Gronau, G., H. Moschuring, and I. Wolff, “Microstrip antenna arrays fed from the backside of the substrate," Proc. Int. Symp.,Antennas Propagat., Kyoto, Japan, 1985.
Hirokawa J. and M. Ando, “Sidelobe suppression in 76GHz post-wall waveguide- fed parallel plate slot arrays,"IEEE Trans.Antennas and Propag., Vol. 48, No. 11,PP. 1727 -1732, Nov. 2000.
X. C. Nie, L. W. Li, N. Yuan, and T. S. Yeo, “Fast analysis of scattering by arbitrarily shaped three-dimensional objects using the precorrectedFFT method,” Microwave Opt. Technol. Lett., vol. 34, no. 6, pp. 438–442, Sep. 2002.
T. Yuan, J.-Y. Li, L.-W. Li, L. Zhang, and M. S. Leong, “A novel series-fed taper antenna array design and analysis,” in Proc. 2005 Asia-Pacific Microw. Conf., Suzhou, China, Dec.PP. 4–7, 2005, vol. 4.